Chords for Pedal Pal FX - PAL 800 JCM Emulator

_ _ _ _ _ _ _ [Ebm] _
_ _ _ _ _ _ _ _
_ [Eb] _ _ _ _ _ _ [A] _
[Eb] _ _ _ [Gb] _ _ [Eb] _ _ _
[Eb] _ _ _ _ _ _ _ [A] _
[Eb] _ _ _ [A] _ [Eb] _ _ _ _
_ _ [Gb] _ _ _ _ _ [Eb] _
_ _ _ _ _ _ _ [Gb] _
_ _ _ [Ab] _ _ [Db] _ _ [Gb] _
[Bb] _ [Gb] _ _ [Ab] _ _ [Eb] _ _ _
_ _ _ _ _ _ [Eb] _ _
[Db] _ [Eb] _ _ [Db] _ _ _ _ _
_ [Eb] _ _ _ _ _ _ [A] _
[Ebm] _ _ _ [A] _ _ _ _ [Gb] _
_ [Eb] _ _ _ _ _ _ _
[Ab] Hey, _ it's Andy with Pro Guitar [D] Shop and ToneReport.com and today [Dm] we're looking at the PAL 800 JCM
emulator from PedalPal FX.
[D] The JCM [C] emulator is [Dm] a painstakingly engineered replica of the vaunted
Marshall JCM [D] 800 preamp section.
[C] PedalPal FX takes the schematic of the original amp,
breaks it down and [D] delivers an exact replica using [C] FETs instead of [F] tubes.
Just [D] like real tubes,
[C] the FETs are carefully audited in the circuit and biased accordingly.
[F] The result is a true
artisan overdrive that is true to [C] the source material.
[D] The gain [G] knob on the emulator [D] works
just like the preamp volume of the original 800, but with [Dm] an even wider range, giving you everything
[D] from low wattage blues breaker tones to singing 80s drive all the way to hell-raising 90s hard
rock crunch.
And just like a real amp, the JCM emulator responds incredibly well to volume knob
cleanup, reining in the gain [C] while altering your pick attack.
[D] The emulator's three-band EQ stays
true to the traditional Marshall [C] tone stack and delivers interactive [D] bands that are augmented by
the presence control.
[F] If that's not enough EQ for you, [D] the emulator packs a master tone trim pot on
the inside for further tone shaping.
And just like all PedalPal FX, each JCM emulator is hand-biased,
built and tested in Venezuela. _
[F] I first started off with that classic slash grind by increasing
the mid-range and the gain.
[D] Let's back off on the gain and add just a subtle bit of Marshall flavor
to our deluxe reverb.
_ [Em] _ _
_ _ _ _ _ _ _ _
[B] _ [Am] _ _ _ _ _ _ [Em] _
_ _ _ _ _ _ [B] _ _
[C] _ _ _ [Gbm] _ [Em] _ _ _ _
_ _ [A] _ _ _ [E] _ _ [Em] _
_ _ _ _ _ _ [Am] _ _
_ [A] _ _ _ [Em] _ _ _ _
[G] _ [D] _ _ [B] _ _ _ _ _
[E] _ _ [Em] _ _ _ _ _ _
_ _ _ _ _ _ _ [A] _
_ _ _ [B] _ _ [E] _ _ [B] _
[E] _ _ _ [Em] _ _ _ [E] _ _
_ _ _ _ _ [Em] _ [Gb] And here's some classic plexi tones with the lower gain setting.
[F] Also, it's nice to have that full EQ
so you could match it to any amp you're playing through.
I have my deluxe reverb pretty bright,
so I've [D] backed off on the presence.
_ _ [A] _
_ _ _ _ _ _ _ _
_ _ _ _ [G] _ _ _ [D] _
_ _ [A] _ _ _ _ _ _
_ [G] _ _ _ [D] _ _ _ _
[A] _ _ _ [G] _ _ _ _ _
_ _ [A] _ _ _ _ _ [D] _
_ _ _ [Ab] _ [A] _ _ [G] _ _
_ [D] _ _ _ _ [A] _ _ [D] _
[A] _ _ _ [D] _ _ _ [A] _ _
_ _ _ _ [B] _ _ _ [D] _
[Bm] _ _ _ [A] _ _ _ _ _
_ _ _ _ Well, that's the PAL [D]-800 JCM emulator really living up to its name.
For more information on this high-quality effect, be sure to check out PedalPal FX.
Thanks for watching. _ _ _ _ _ _
[C] _ [D] _ _ _ _ _ _ [N] _